StockFetcher Forums · Filter Exchange · THE MIGHTY RIGGS HAS DONE IT AGAIN PART I<< 1 ... 3 4 5 6 7 >>Post Follow-up
clam61
92 posts
msg #43651
- Ignore clam61
modified		 5/12/2006 12:32:25 AM

RIGGS

Thank you. I am very grateful for the offer. Fortunately I did not buy, anything yet. Actually I did not perform any TA on your fetcher picks, i just put them all on my watch list which is probably a bad mistake. I just read about your win ratio I thought they would all be good!

On March 8th, it picked these

FLR - Moved up good
PBCT - moved up slightly then dropped
FCN - dropped
FWRD - moved up slightly then dropped
KNL - moved up good

This is the filter, I used the Riggs Warm Pop, not the one on this thread.

Fetcher[ close is above 20
60-day slope of close is above 0
Draw Williams %R(7) line at 0
sort column 8 ascending
average volume(90)is above 150000
offset 0-days


/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE RSI(7) */

set{rsval, INDPOSITION(RSI(7), 60) * 100}

/* NORMALIZE CCI(7) */

set{ccval, INDPOSITION(CCI(7), 60) * 100 }

/* NORMALIZE williams %r(7) */

set{wrval, INDPOSITION(williams %r(7), 60) * 100 }


/* DRAW THE MP CCIWLR CHART */

and draw wrval
and draw adval on plot wrval
and draw rsval on plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column rsval
add column wrval

adval has been above 80 the last 1 month
adval is above 75
wrval is below 50

adval has been increasing 1-day
ccval has been increasing 1-day
rsval has been increasing 1-day
wrval has been increasing 1-day]
BFreshour
139 posts
msg #43670
- Ignore BFreshour		 5/12/2006 11:14:05 AM

No filter will be perfect. Anything can happen in the market at any time. The only thing certain in the market is uncertainty. ;)
nikoschopen
2,824 posts
msg #43672
- Ignore nikoschopen		 5/12/2006 2:03:27 PM

In support of Clam, why would you NOT want to paper trade Riggs' filters?
clam61
92 posts
msg #43675
- Ignore clam61		 5/12/2006 3:30:58 PM

i know no filter is perfect, and im not complaining

this filter looks great. i just want to know what riggs looks for after he filters it.

thanks
clam61
92 posts
msg #43687
- Ignore clam61		 5/13/2006 4:03:26 AM

Hey Riggs,

What are important things to look for when TAing the stocks after they have been filtered?
WALLSTREETGENIUS
983 posts
msg #42114
- Ignore WALLSTREETGENIUS
modified		 5/22/2006 3:48:41 AM

While all the jealous bashers were doing what they do best, "I" was working hard for you. I told you this filter would not fail and I was right. I wrote it about 4 or 5 days ago,(3/12/06)but take a look what it has poored out in the last 7-days. You won't believe your eyes! In that 7-day period, it spit out 44 winners, and only 1 single loser!!! That's a 97.8% winning percentage! Just mail your checks to:

THE MIGHTY RIGGS
P.O. BOX 97.8%
$ALL WINNERS$, USA 1,000,000

Just kidding....don't do that!
_____________________________



OFFSET 7 DAYS:

**** THE MIGHTY RIGGS ACCUMULATION POP-80 ****

Fetcher[MACD Fast Line(12,26)is above 0
Set{MACDDiff, MACD fast line(12,26) - MACD slow line(12,26) }
set{MACDb,days(MACDDiff is above MACDDiff 1 day ago,100)}
set{MACDa,days(MACDDiff is below MACDDiff 1 day ago,100)}
set{MACDX, MACDa - MACDb}
60-day slope of close is above 0
Do not draw 60-day slope of close
Draw Linear Regression Indicator(20)
Average volume(90)is above 200000
Add column average volume(90)
Add column MACDX
sort column 10 ascending
close is above 10
offset 7

/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE RSI(7) */

set{rsval, INDPOSITION(RSI(7), 60) * 100}

/* NORMALIZE CCI(7) */

set{ccval, INDPOSITION(CCI(7), 60) * 100 }

/* NORMALIZE Williams %R(7) */

set{wrval, INDPOSITION(Williams %R(7), 60) * 100 }

and draw wrval
and draw adval on plot wrval
and draw rsval plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column rsval
add column wrval

adval is Above 80
ccval is Below 5
rsval is Below 5
wrval is Below 5]




OFFSET 6-DAYS

Fetcher[MACD Fast Line(12,26)is above 0
Set{MACDDiff, MACD fast line(12,26) - MACD slow line(12,26) }
set{MACDb,days(MACDDiff is above MACDDiff 1 day ago,100)}
set{MACDa,days(MACDDiff is below MACDDiff 1 day ago,100)}
set{MACDX, MACDa - MACDb}
60-day slope of close is above 0
Do not draw 60-day slope of close
Draw Linear Regression Indicator(20)
Average volume(90)is above 200000
Add column average volume(90)
Add column MACDX
sort column 10 ascending
close is above 10
offset 6

/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE RSI(7) */

set{rsval, INDPOSITION(RSI(7), 60) * 100}

/* NORMALIZE CCI(7) */

set{ccval, INDPOSITION(CCI(7), 60) * 100 }

/* NORMALIZE Williams %R(7) */

set{wrval, INDPOSITION(Williams %R(7), 60) * 100 }

and draw wrval
and draw adval on plot wrval
and draw rsval plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column rsval
add column wrval

adval is Above 80
ccval is Below 5
rsval is Below 5
wrval is Below 5]







OFFSET 5-DAYS:

Fetcher[MACD Fast Line(12,26)is above 0
Set{MACDDiff, MACD fast line(12,26) - MACD slow line(12,26) }
set{MACDb,days(MACDDiff is above MACDDiff 1 day ago,100)}
set{MACDa,days(MACDDiff is below MACDDiff 1 day ago,100)}
set{MACDX, MACDa - MACDb}
60-day slope of close is above 0
Do not draw 60-day slope of close
Draw Linear Regression Indicator(20)
Average volume(90)is above 200000
Add column average volume(90)
Add column MACDX
sort column 10 ascending
close is above 10
offset 5

/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE RSI(7) */

set{rsval, INDPOSITION(RSI(7), 60) * 100}

/* NORMALIZE CCI(7) */

set{ccval, INDPOSITION(CCI(7), 60) * 100 }

/* NORMALIZE Williams %R(7) */

set{wrval, INDPOSITION(Williams %R(7), 60) * 100 }

and draw wrval
and draw adval on plot wrval
and draw rsval on plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column rsval
add column wrval

adval is Above 80
ccval is Below 5
rsval is Below 5
wrval is Below 5]





OFFSET 4-DAYS:

Fetcher[MACD Fast Line(12,26)is above 0
Set{MACDDiff, MACD fast line(12,26) - MACD slow line(12,26) }
set{MACDb,days(MACDDiff is above MACDDiff 1 day ago,100)}
set{MACDa,days(MACDDiff is below MACDDiff 1 day ago,100)}
set{MACDX, MACDa - MACDb}
60-day slope of close is above 0
Do not draw 60-day slope of close
Draw Linear Regression Indicator(20)
Average volume(90)is above 200000
Add column average volume(90)
Add column MACDX
sort column 10 ascending
close is above 10
offset 4

/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE RSI(7) */

set{rsval, INDPOSITION(RSI(7), 60) * 100}

/* NORMALIZE CCI(7) */

set{ccval, INDPOSITION(CCI(7), 60) * 100 }

/* NORMALIZE Williams %R(7) */

set{wrval, INDPOSITION(Williams %R(7), 60) * 100 }

and draw wrval
and draw adval on plot wrval
and draw rsval on plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column rsval
add column wrval

adval is Above 80
ccval is Below 5
rsval is Below 5
wrval is Below 5]




OFFSET 3-DAYS:

Fetcher[MACD Fast Line(12,26)is above 0
Set{MACDDiff, MACD fast line(12,26) - MACD slow line(12,26) }
set{MACDb,days(MACDDiff is above MACDDiff 1 day ago,100)}
set{MACDa,days(MACDDiff is below MACDDiff 1 day ago,100)}
set{MACDX, MACDa - MACDb}
60-day slope of close is above 0
Do not draw 60-day slope of close
Draw Linear Regression Indicator(20)
Average volume(90)is above 200000
Add column average volume(90)
Add column MACDX
sort column 10 ascending
close is above 10
offset 3

/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE RSI(7) */

set{rsval, INDPOSITION(RSI(7), 60) * 100}

/* NORMALIZE CCI(7) */

set{ccval, INDPOSITION(CCI(7), 60) * 100 }

/* NORMALIZE Williams %R(7) */

set{wrval, INDPOSITION(Williams %R(7), 60) * 100 }

and draw wrval
and draw adval on plot wrval
and draw rsval on plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column rsval
add column wrval

adval is Above 80
ccval is Below 5
rsval is Below 5
wrval is Below 5]




OFFSET 2-DAYS:

Fetcher[MACD Fast Line(12,26)is above 0
Set{MACDDiff, MACD fast line(12,26) - MACD slow line(12,26) }
set{MACDb,days(MACDDiff is above MACDDiff 1 day ago,100)}
set{MACDa,days(MACDDiff is below MACDDiff 1 day ago,100)}
set{MACDX, MACDa - MACDb}
60-day slope of close is above 0
Do not draw 60-day slope of close
Draw Linear Regression Indicator(20)
Average volume(90)is above 200000
Add column average volume(90)
Add column MACDX
sort column 10 ascending
close is above 10
offset 2

/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE RSI(7) */

set{rsval, INDPOSITION(RSI(7), 60) * 100}

/* NORMALIZE CCI(7) */

set{ccval, INDPOSITION(CCI(7), 60) * 100 }

/* NORMALIZE Williams %R(7) */

set{wrval, INDPOSITION(Williams %R(7), 60) * 100 }

and draw wrval
and draw adval on plot wrval
and draw rsval on plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column rsval
add column wrval

adval is Above 80
ccval is Below 5
rsval is Below 5
wrval is Below 5]




OFFSET 1-DAY:

Fetcher[MACD Fast Line(12,26)is above 0
Set{MACDDiff, MACD fast line(12,26) - MACD slow line(12,26) }
set{MACDb,days(MACDDiff is above MACDDiff 1 day ago,100)}
set{MACDa,days(MACDDiff is below MACDDiff 1 day ago,100)}
set{MACDX, MACDa - MACDb}
60-day slope of close is above 0
Do not draw 60-day slope of close
Draw Linear Regression Indicator(20)
Average volume(90)is above 200000
Add column average volume(90)
Add column MACDX
sort column 10 ascending
close is above 10
offset 1

/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE RSI(7) */

set{rsval, INDPOSITION(RSI(7), 60) * 100}

/* NORMALIZE CCI(7) */

set{ccval, INDPOSITION(CCI(7), 60) * 100 }

/* NORMALIZE Williams %R(7) */

set{wrval, INDPOSITION(Williams %R(7), 60) * 100 }

and draw wrval
and draw adval on plot wrval
and draw rsval on plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column rsval
add column wrval

adval is Above 80
ccval is Below 5
rsval is Below 5
wrval is Below 5]





OFFSET 0-DAYS

Fetcher[MACD Fast Line(12,26)is above 0
Set{MACDDiff, MACD fast line(12,26) - MACD slow line(12,26) }
set{MACDb,days(MACDDiff is above MACDDiff 1 day ago,100)}
set{MACDa,days(MACDDiff is below MACDDiff 1 day ago,100)}
set{MACDX, MACDa - MACDb}
60-day slope of close is above 0
Do not draw 60-day slope of close
Draw Linear Regression Indicator(20)
Average volume(90)is above 200000
Add column average volume(90)
Add column MACDX
sort column 10 ascending
close is above 10
offset 0

/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE RSI(7) */

set{rsval, INDPOSITION(RSI(7), 60) * 100}

/* NORMALIZE CCI(7) */

set{ccval, INDPOSITION(CCI(7), 60) * 100 }

/* NORMALIZE Williams %R(7) */

set{wrval, INDPOSITION(Williams %R(7), 60) * 100 }

and draw wrval
and draw adval on plot wrval
and draw rsval plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column rsval
add column wrval

adval is Above 80
ccval is Below 5
rsval is below 5
wrval is Below 5]





THE MIGHTY RIGGS DOES IT AGAIN! :)































risjr
230 posts
msg #136684
- Ignore risjr		 7/9/2017 10:34:05 PM

Does anyone have any additional criteria for setting up a 15 minute chart?

Suggestions are greatly appreciated.

Thanks

Ron
StockFetcher Forums · Filter Exchange · THE MIGHTY RIGGS HAS DONE IT AGAIN PART I<< 1 ... 3 4 5 6 7 >>Post Follow-up

StockFetcher Tools
Filter Editor
My Filters
Watch Lists
Chart+
Find Similar Stocks
Shared Lists
Popular Resources
StockFetcher Forums
Indicator List
Filter Phrases
Examples
Site Search
Sector/Industry List
Usage Guide
Support
Contact Us
Support Home

Subscriber
Subscriber Benefits
Settings
Chart
Results
MyFilters
*** Disclaimer *** StockFetcher.com does not endorse or suggest any of the securities which are returned in any of the searches or filters. They are provided purely for informational and research purposes. StockFetcher.com does not recommend particular securities. StockFetcher.com, Vestyl Software, L.L.C. and involved content providers shall not be liable for any errors or delays in the content, or for any actions taken based on the content.


Copyright 2022 - Vestyl Software L.L.C.•Terms of Service | License | Questions or comments? Contact Us
EOD Data sources: DDFPlus & CSI Data Quotes delayed during active market hours. Delay times are at least 15 mins for NASDAQ, 20 mins for NYSE and Amex. Delayed intraday data provided by DDFPlus


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.